The TC40 & TC650 temperature calibrators areportable instruments
that require no physical installation other than connection to a grounded
ACpower source. Do not connect AC power until you have verified
that the line voltage is correct and that the proper fuse is installed.
Otherwise damage to the equipment may occure.
- Sorry, this product cannot be purchased.
Tek Know TC650 (50°C to 650°C) Temperature Calibrator
In Stock
Services:
-
Free Delivery
Highlights:
Compare- Range 50 to 600°C
- Tool for changing inserts
- Temperature calibrator: TC50 or 650
- Insertion tube with 6.5 mm hole.
Categories: Calibration Instruments, Temperature Calibrator
Tags: Calibrator, Tek Know
Description
Reviews (0)
Be the first to review “Tek Know TC650 (50°C to 650°C) Temperature Calibrator” Cancel reply
Related Products
Nagman 650H/650H2 Universal Dry Block Medium Temperature Calibrator
Highlights:
- Range: 20°C above Ambient to 650°C
- Accuracy: ±1.5°C
- Stabilization Time: 15 Minutes
- Stability: ±0.5°C (650-H); ±0.6°C (650-H2)
ASCO EF-8316G4 Solenoid Valve Red-Hat (8030 Series) | 4-way 1/2 In NPT 120/60-110/50 AC
Highlights:
- Operate at low pressures
- Normally Closed or Normally Open operation.
- Widely used for dispensing
- Normally Open valve well suited for venting systems
Fluke 700PTP-1 Pneumatic Test Pump
Highlights:
- Easily cleaned without disassembly
- Two pressure ports allowing simultaneous connection
- Adjustable stroke length
- Easy to use
Ametek ATC-140A/B Advanced Temperature Calibrator Range: -20°C to 140°C (-4 to 284°F)
Highlights:
- Dual-zone Heating block
- Insert diameter 63,5 mm (2.5 in)
- Liquid bath configuration Yes
- Accuracy A model 0.20°C (0.36°F)
- Min. temp. -20°C (-4°F)
- Max. temp. 140°C (°284F)
ICON RESEARCH DK-2 DOCTORDIESEL ENGINE ANALYSIS TESTER
Highlights:
- Reduced maintenance costs
- Improved performance
- Reduced fuel consumption
- Reduced emissions through combustion optimization
GX-8000 (LEL) Portable Single Gas Monitor
3 ★
3 ★
1 Rating
5 ★
0
4 ★
0
3 ★
1
2 ★
0
1 ★
0
LR-Cal LPP 700 Pressure Test Pump 700 bar (10 000 psi)
Highlights:
- Hydraulic (operated with oil or water)
- Pressure generation up to +700 bar (10150 psi)
- Portable
- Simple and easy operation
Recently Viewed
KTE KT-PSTAR-CSA PROGRAMMABLE STARTER MODULE
Highlights:
-
TYPE : KT-PSTAR-CSA
-
PROGRAMMABLE STARTER MODULE
- BRNAD: KTE
- Low Cost
There are no reviews yet.