The TC40 & TC650 temperature calibrators areportable instruments
that require no physical installation other than connection to a grounded
ACpower source. Do not connect AC power until you have verified
that the line voltage is correct and that the proper fuse is installed.
Otherwise damage to the equipment may occure.
Tek Know TC650 (50°C to 650°C) Temperature Calibrator
In Stock
Services:
-
Free Delivery
Highlights:
Compare- Range 50 to 600°C
- Tool for changing inserts
- Temperature calibrator: TC50 or 650
- Insertion tube with 6.5 mm hole.
Categories: Calibration Instruments, Temperature Calibrator
Tags: Calibrator, Tek Know
Description
Reviews (0)
Be the first to review “Tek Know TC650 (50°C to 650°C) Temperature Calibrator” Cancel reply
Related Products
RKI GX-2009 Portable Multi Gas Detector with Charger
Highlights:
- Simultaneous detection of 4 gases, LEL, O2, H2S & CO
- 3 visual alarm LED’s
- Dual audible alarm ports
- 20 hours of operation (NiMH batteries)
Nagman 650H/650H2 Universal Dry Block Medium Temperature Calibrator
Highlights:
- Range: 20°C above Ambient to 650°C
- Accuracy: ±1.5°C
- Stabilization Time: 15 Minutes
- Stability: ±0.5°C (650-H); ±0.6°C (650-H2)
GX-8000 (LEL) Portable Single Gas Monitor
3 ★
3 ★
1 Rating
5 ★
0
4 ★
0
3 ★
1
2 ★
0
1 ★
0
LR-Cal LPP 700 Pressure Test Pump 700 bar (10 000 psi)
Highlights:
- Hydraulic (operated with oil or water)
- Pressure generation up to +700 bar (10150 psi)
- Portable
- Simple and easy operation
ASCO EF-8316G4 Solenoid Valve Red-Hat (8030 Series) | 4-way 1/2 In NPT 120/60-110/50 AC
Highlights:
- Operate at low pressures
- Normally Closed or Normally Open operation.
- Widely used for dispensing
- Normally Open valve well suited for venting systems
Ametek ATC-140A/B Advanced Temperature Calibrator Range: -20°C to 140°C (-4 to 284°F)
Highlights:
- Dual-zone Heating block
- Insert diameter 63,5 mm (2.5 in)
- Liquid bath configuration Yes
- Accuracy A model 0.20°C (0.36°F)
- Min. temp. -20°C (-4°F)
- Max. temp. 140°C (°284F)
Recently Viewed
GX-8000 (LEL) Portable Single Gas Monitor
3 ★
3 ★
1 Rating
5 ★
0
4 ★
0
3 ★
1
2 ★
0
1 ★
0
Nakakita NS TM 732 0 to 200°C Pneumatic Temperature Controller
Highlights:
- Type: NSTM 732
- Range: 0-200c
- Air Pressure: 1.4 kg/cm2
- Control Pressure: 0.2 – 1.0 kg/cm2
Furuno NX 700A-B Navtex Receiver
Highlights:
- Low power consumption
- 5″ silver bright LCD
- NAV data display
- Dual channel reception
Nagman 650H/650H2 Universal Dry Block Medium Temperature Calibrator
Highlights:
- Range: 20°C above Ambient to 650°C
- Accuracy: ±1.5°C
- Stabilization Time: 15 Minutes
- Stability: ±0.5°C (650-H); ±0.6°C (650-H2)
Weintek MT8071IP HMI Weinview 7 inch TFT Display
Highlights:
- Touch screen, TFT color LCD
- 7.0″ wide-screen size (800×480)
- Ethernet, 10/100 base-T x 1
- COM1:RS-232,COM2:RS-485 2W/4W
Kirloskar KG 545 12w Green Generator Controller
Highlights:
- Maker: Kirloskar
- Model: KG-545
- Description: Generator Mains Failure Controller
- Condition: New
KTE KT-PSTAR-CSA PROGRAMMABLE STARTER MODULE
Highlights:
-
TYPE : KT-PSTAR-CSA
-
PROGRAMMABLE STARTER MODULE
- BRNAD: KTE
- Low Cost
NHE-OKI FD-8311 opt Electric Smoke/Heat Detector
Highlights:
- Proven technology
- Highly reliable technology fire detection system
- Product Code: FD-8311
- Built-in alarm indicator
Yokogawa PT500 Autopilot
Highlights:
- Enhanced reliability
- High operability
- Expandable system
There are no reviews yet.