- The ANTHEA EM speed log is designed for merchant and cruising ships. It is used with maximum 70 m length of cable, between the main cabinet and the sensor.
- lectromagnetic Speed Log in either a simple or dual axis configuration. The Anthea Electromagnetic Speed Log is composed of one IP65 metal case, one 48mm sensor that can be dismantled when ship is afloat, and one weldable or screw-on-type hullfitting with valve.
- The Anthea has a 2 line LCD display in an IP65 rated metal case, which displays Speed on a circular bargraph. Also shown is the covered distance including reset and Scale, Test, Alarm LED display. There is also an Electromechanical mile adding counter, no rest, 2 Alarm sets and Error message display.
- The Anthea Electromagnetic speed log has automatic gain control and damping control via strap. The unit also has 3 points linearization, brightness control and permanent self-test.
- ANTHEA is compatible with all navigation peripherals.
Anthea Electromagnetic Speed Log single or dual axis-BEN Marine
In Stock
Highlights:
Compare► One IP65 metal case
► One sensor
► One hull fitting
Categories: Bridge Navigation, Speed Log
Tags: Ben Marine, Speed Log
Reviews (0)
Be the first to review “Anthea Electromagnetic Speed Log single or dual axis-BEN Marine” Cancel reply
Related Products
Magnetic Compass Radio Holland
Highlights:
- Ceiling and table top compass
- Low cost
- Make it easy
- Graduated scale
McMurdo SmartFind M5-AIS
Highlights:
- 3.5” colour LCD display
- radar overview displays
- Compact, low cost solution
- Unique alarm function
Furuno Doppler Speed Log DS-80
Highlights:
- Doppler effect principle
- Latest IMO, IEC and ISO
- Hight accuracy
- 1 MHz sonic frequency
Raytheon Anschutz Pilotstar D Autopilot
Highlights:
- Accurate steering
- Speed adaptive
- Remote operator units
- Quick and simple
Maris S-VDR 2000
Highlights:
- Protective Capsule
- Ethernet interface
- Gyro/Log interface
- 32 digital channels
Smartfind Mcmurdo GMDSS Navtex Receiver
Highlights:
- 6” daylight viewable 4 colour display
- ECDIS and INS integration
- Easy to operate
- Printer output
Nav5 GMDSS Navtex Receiver
Highlights:
- LCD display back light
- 12/24 volt DC supply
- Simplicity of operation
- Easy to operate
Furuno NX 700A-B Navtex Receiver
Highlights:
- Low power consumption
- 5″ silver bright LCD
- NAV data display
- Dual channel reception
Recently Viewed
FTGMDC FT-8800 Class-A AIS Terminal With 5.7″ Display
Highlights:
- 6 Inch LCD
- Chinese and English Display
- AIS target approaching
- High performance
Nav5 GMDSS Navtex Receiver
Highlights:
- LCD display back light
- 12/24 volt DC supply
- Simplicity of operation
- Easy to operate
Solo Heat and Smoke Detector Testing Equipment
Highlights:
- Easy to use
- Low cost
- High Efficiency
- Approved by SOLO
LR-Cal LPP 700 Pressure Test Pump 700 bar (10 000 psi)
Highlights:
- Hydraulic (operated with oil or water)
- Pressure generation up to +700 bar (10150 psi)
- Portable
- Simple and easy operation
Tek Know TC65M (30°C to 650°C) Temperature Calibrator
Highlights:
- Range 50 to 600°C
- 166 mm well depth
- No liquids, safe dry calibration
- Stability to ±0.75°C
- Accurate to ±1.5°C
- 3 buttons – easy to use
ComNav G2 GNSS Satellite Compass with G2 Navigator Display
Highlights:
- RS-232 and RS-422 Serial Ports via Distribution Unit
- Auto red night vision feature – color LCD
- Simple touch 8 button Keypad
- Crystal clear sunlight viewable TFT color LCD or Silver backed
- High contrast monochrome LCD
JRC JMA-9123 7XA/9XA 9900 Series ARPA RADAR
Highlights:
- 23” high visibility LCD screen
- Digital signal processing
- Wide dynamic range receiver
- High speed version available
Gastron TS-4000Ex Series Intelligent Toxic Gas Detector
Highlights:
- Local LCD display
- 3-wire connection
- 4-20mA signal output
- Long life sensor element
There are no reviews yet.