- TS – 400 Ex series is an auto sampling-type combustible gas detector, having a built-in high efficient micro pump. It can detect parts per million (PPM), Lower explosive limit (LEL) and volume (%), applying a semiconductor sensor, catalytic sensor and thermal conductivity sensor.
- It was designed to monitor for gas leaks in hazardous areas such as low-temperature, high-ground areas, etc., which place a barrier to maintenance and repair, by continuously sampling gas in those places, using explosion-proof housing.
- Display indicates the density of leaked gas.
- Minimizes the influence from the exterior environment (temperature, humidity, pressure, electrical noise, etc.); at the same time it was manufactured to guarantee long life, high sensitivity, linearity, reproducibility , etc.
Gastron TS-4000Ex Series Intelligent Toxic Gas Detector
In Stock
Services:
-
Free Delivery
Highlights:
Compare- Local LCD display
- 3-wire connection
- 4-20mA signal output
- Long life sensor element
Categories: Calibration Instruments, Gas Detector
Tags: Gas Detector, Gastron
Description
Reviews (0)
Be the first to review “Gastron TS-4000Ex Series Intelligent Toxic Gas Detector” Cancel reply
Related Products
ICON RESEARCH DK-2 DOCTORDIESEL ENGINE ANALYSIS TESTER
Highlights:
- Reduced maintenance costs
- Improved performance
- Reduced fuel consumption
- Reduced emissions through combustion optimization
Ametek ATC-140A/B Advanced Temperature Calibrator Range: -20°C to 140°C (-4 to 284°F)
Highlights:
- Dual-zone Heating block
- Insert diameter 63,5 mm (2.5 in)
- Liquid bath configuration Yes
- Accuracy A model 0.20°C (0.36°F)
- Min. temp. -20°C (-4°F)
- Max. temp. 140°C (°284F)
OMC-139 Marine Wind Display
Highlights:
- Double led circle
- Gust display
- 2 minutes average & 10 minutes average
- Remote brightness control (optional)
- Compatible with several wind sensors
Vimex TC60M (30°C to 600°C) Temperature Calibrator
Highlights:
• Range 50 to 600°C
• Accurate to ± 1,5°C
• 3 buttons – easy to use
• 155 mm well depth
Tek Know TC65M (30°C to 650°C) Temperature Calibrator
Highlights:
- Range 50 to 600°C
- 166 mm well depth
- No liquids, safe dry calibration
- Stability to ±0.75°C
- Accurate to ±1.5°C
- 3 buttons – easy to use
Recently Viewed
JRC JAN-2000 ECDIS Complete Set
Highlights:
- 19 and 23-inch high brightness display
- New high performance processor
- AVCS pre-installed & C-Map e-Token standard
- Multiple and wide screen viewing
- Built in UPS for safety shutdown
SAMYUNG SI-30A Class A AIS Transponder
Highlights:
- GLONASS/GPS function
- User-friendly one touch keypad
- Fully compatible with all NMEA standards
- System self-restoring function
Furuno VDR VR-5000
Highlights:
- 12-hour recording of data
- UTC time tagged for system
- Reliable and fast data exchange
- Easy setup by using PC with Web Browser
Smartfind Mcmurdo GMDSS Navtex Receiver
Highlights:
- 6” daylight viewable 4 colour display
- ECDIS and INS integration
- Easy to operate
- Printer output
Elac 5100/ LAZ 5100 Navigation Echosounder
Highlights:
- ELAC LAZ 5100 is the latest navigation echo sounder of Wärtsilä ELAC Nautik, available as single- or dual-frequency unit.
JRC JAN-9201/7201 Complete ECDIS
Highlights:
- Sophisticated user interface
- Mandatory installation of ECDIS
- Regulations and major specifications
- Sophisticated user interface
- Easy-to-use operating unit
- Optional keyboard
- Route editing and safety checking
Furuno GP170 GP170D -GNSS Navigator
Highlights:
- Simplified menu operation
- Enhanced route planning/management function
- 10 Hz (0.1 second) position update rate
- Front panel USB port for export/import of routing data,
Jotron TR-8000 Class A AIS with GPS Antenna
Highlights:
- 7″ touch screen display
- Software upgradable
- Easy ECDIS interfac
- Collision alarms (tCPA, CPA)
- Separate display and transponder unit
Skipper Echosounder ED165
Highlights:
- Paper Recording Echosounder
- 50 kHz
There are no reviews yet.