- TS – 400 Ex series is an auto sampling-type combustible gas detector, having a built-in high efficient micro pump. It can detect parts per million (PPM), Lower explosive limit (LEL) and volume (%), applying a semiconductor sensor, catalytic sensor and thermal conductivity sensor.
- It was designed to monitor for gas leaks in hazardous areas such as low-temperature, high-ground areas, etc., which place a barrier to maintenance and repair, by continuously sampling gas in those places, using explosion-proof housing.
- Display indicates the density of leaked gas.
- Minimizes the influence from the exterior environment (temperature, humidity, pressure, electrical noise, etc.); at the same time it was manufactured to guarantee long life, high sensitivity, linearity, reproducibility , etc.
Gastron TS-4000Ex Series Intelligent Toxic Gas Detector
In Stock
Services:
-
Free Delivery
Highlights:
Compare- Local LCD display
- 3-wire connection
- 4-20mA signal output
- Long life sensor element
Categories: Calibration Instruments, Gas Detector
Tags: Gas Detector, Gastron
Description
Reviews (0)
Be the first to review “Gastron TS-4000Ex Series Intelligent Toxic Gas Detector” Cancel reply
Related Products
ICON RESEARCH DK-2 DOCTORDIESEL ENGINE ANALYSIS TESTER
Highlights:
- Reduced maintenance costs
- Improved performance
- Reduced fuel consumption
- Reduced emissions through combustion optimization
Fluke 700PTP-1 Pneumatic Test Pump
Highlights:
- Easily cleaned without disassembly
- Two pressure ports allowing simultaneous connection
- Adjustable stroke length
- Easy to use
OMC-139 Marine Wind Display
Highlights:
- Double led circle
- Gust display
- 2 minutes average & 10 minutes average
- Remote brightness control (optional)
- Compatible with several wind sensors
GX-8000 (LEL) Portable Single Gas Monitor
3 ★
3 ★
1 Rating
5 ★
0
4 ★
0
3 ★
1
2 ★
0
1 ★
0
Riken Keiki RX-8000 Portable Multi Gas Detector
Highlights:
- Large simultaneous display with auto back lighting
- Compact and lightweight
- Gases are drawn by the built-in pump.
- Strong sample drawing capability
- Lithium-ion rechargeable battery
- The battery unit can be replaced by users.
- Ergonomic design with wrist strap for hands free operation
Ametek ATC-140A/B Advanced Temperature Calibrator Range: -20°C to 140°C (-4 to 284°F)
Highlights:
- Dual-zone Heating block
- Insert diameter 63,5 mm (2.5 in)
- Liquid bath configuration Yes
- Accuracy A model 0.20°C (0.36°F)
- Min. temp. -20°C (-4°F)
- Max. temp. 140°C (°284F)
Wilhelmsen UNIRX-1A REFRIGERANT LEAK DETECTOR
Highlights:
- High and Low sensitivity level
- Cordless
- Audible alarm
- 5 ppm sensitivity
- Batteries 2 pcs C-cell alkaline
Recently Viewed
Solo Heat and Smoke Detector Testing Equipment
Highlights:
- Easy to use
- Low cost
- High Efficiency
- Approved by SOLO
Konsberg AIS 200 Automatic identification system
Highlights:
- Easy installation
- AIS Minimum Keyboard Display
- VHF data communication
- GPS Position Interface
Newmar PT-24-20U Phase Three PT Series Battery Charger (Volts: 24, Amps: 20)
Highlights:
- 200 AH Battery
- – 5 mV per cell per ˚C
- 25′ cable and plug-in connector
- 4 Amp Constant Load
Viscochief VCU-160 Alfa Laval Viscosity Controller
Highlights:
- 110VAC, 220VAC
- 55°C Maximum
- Temperature Sensor, Remote Communication
- Function Alarm, Process Alarm,
SAAB Tank Radar / Rosemount VPS5810 Vapour Pressure Sensor
Highlights:
- -100 to 300mbar
- 5.6 to 7.0V
- Type: 2967/8
- PDCR 250 2967
Furuno VDR VR-5000
Highlights:
- 12-hour recording of data
- UTC time tagged for system
- Reliable and fast data exchange
- Easy setup by using PC with Web Browser
JRC JHS-183 AIS
Highlights:
- Dual color LED backlight
- Guard zone
- AIS-SART
- 4.5-inch LCD display
JRC JMA-9123 7XA/9XA 9900 Series ARPA RADAR
Highlights:
- 23” high visibility LCD screen
- Digital signal processing
- Wide dynamic range receiver
- High speed version available
There are no reviews yet.