The TC40 & TC650 temperature calibrators areportable instruments
that require no physical installation other than connection to a grounded
ACpower source. Do not connect AC power until you have verified
that the line voltage is correct and that the proper fuse is installed.
Otherwise damage to the equipment may occure.
Tek Know TC650 (50°C to 650°C) Temperature Calibrator
In Stock
Services:
-
Free Delivery
Highlights:
Compare- Range 50 to 600°C
- Tool for changing inserts
- Temperature calibrator: TC50 or 650
- Insertion tube with 6.5 mm hole.
Categories: Calibration Instruments, Temperature Calibrator
Tags: Calibrator, Tek Know
Description
Reviews (0)
Be the first to review “Tek Know TC650 (50°C to 650°C) Temperature Calibrator” Cancel reply
Related Products
ASCO EF-8316G4 Solenoid Valve Red-Hat (8030 Series) | 4-way 1/2 In NPT 120/60-110/50 AC
Highlights:
- Operate at low pressures
- Normally Closed or Normally Open operation.
- Widely used for dispensing
- Normally Open valve well suited for venting systems
Gastron TS-4000Ex Series Intelligent Toxic Gas Detector
Highlights:
- Local LCD display
- 3-wire connection
- 4-20mA signal output
- Long life sensor element
Fluke 700PTP-1 Pneumatic Test Pump
Highlights:
- Easily cleaned without disassembly
- Two pressure ports allowing simultaneous connection
- Adjustable stroke length
- Easy to use
ICON RESEARCH DK-2 DOCTORDIESEL ENGINE ANALYSIS TESTER
Highlights:
- Reduced maintenance costs
- Improved performance
- Reduced fuel consumption
- Reduced emissions through combustion optimization
LR-Cal LPP 700 Pressure Test Pump 700 bar (10 000 psi)
Highlights:
- Hydraulic (operated with oil or water)
- Pressure generation up to +700 bar (10150 psi)
- Portable
- Simple and easy operation
Gastec GV-100/100S Gas sampling pump kit
Highlights:
- Comfortable Grip
- Intrinsically Safe
- Weight: 270Gm
- Handle lockable
SIKA TP17650M Dry Block Temperature Calibrator (230v)
Highlights:
Temperature Range: Room temperature…650 °C
Power Supply: 230V 50/60Hz 1000w
Date of Manufacture: 01/2017
Made In Germany
Recently Viewed
Nakakita NS TM 732 0 to 200°C Pneumatic Temperature Controller
Highlights:
- Type: NSTM 732
- Range: 0-200c
- Air Pressure: 1.4 kg/cm2
- Control Pressure: 0.2 – 1.0 kg/cm2
JRC JAN-9201/7201 Complete ECDIS
Highlights:
- Sophisticated user interface
- Mandatory installation of ECDIS
- Regulations and major specifications
- Sophisticated user interface
- Easy-to-use operating unit
- Optional keyboard
- Route editing and safety checking
Solo Heat and Smoke Detector Testing Equipment
Highlights:
- Easy to use
- Low cost
- High Efficiency
- Approved by SOLO
SAMYUNG SI-30A Class A AIS Transponder
Highlights:
- GLONASS/GPS function
- User-friendly one touch keypad
- Fully compatible with all NMEA standards
- System self-restoring function
Skipper GDS-101 Echo sounder
Highlights:
- Single frequency 38, 50 or 200 kHz
- Color TFT LCD, with Day/night screenData
- Possibility for external printer
- Low and high frequency
Tek Know TC65M (30°C to 650°C) Temperature Calibrator
Highlights:
- Range 50 to 600°C
- 166 mm well depth
- No liquids, safe dry calibration
- Stability to ±0.75°C
- Accurate to ±1.5°C
- 3 buttons – easy to use
Jmc V-3006 Marine Echosounder
Highlights:
- 10.4″ Color TFT LCD
- Dual frequency
- Graphic and digital display of water temperature
- Vertical or horizontal screen split
Wilhelmsen UNIRX-1A REFRIGERANT LEAK DETECTOR
Highlights:
- High and Low sensitivity level
- Cordless
- Audible alarm
- 5 ppm sensitivity
- Batteries 2 pcs C-cell alkaline
There are no reviews yet.