- TS – 400 Ex series is an auto sampling-type combustible gas detector, having a built-in high efficient micro pump. It can detect parts per million (PPM), Lower explosive limit (LEL) and volume (%), applying a semiconductor sensor, catalytic sensor and thermal conductivity sensor.
- It was designed to monitor for gas leaks in hazardous areas such as low-temperature, high-ground areas, etc., which place a barrier to maintenance and repair, by continuously sampling gas in those places, using explosion-proof housing.
- Display indicates the density of leaked gas.
- Minimizes the influence from the exterior environment (temperature, humidity, pressure, electrical noise, etc.); at the same time it was manufactured to guarantee long life, high sensitivity, linearity, reproducibility , etc.
- Sorry, this product cannot be purchased.
Gastron TS-4000Ex Series Intelligent Toxic Gas Detector
In Stock
Services:
-
Free Delivery
Highlights:
Compare- Local LCD display
- 3-wire connection
- 4-20mA signal output
- Long life sensor element
Categories: Calibration Instruments, Gas Detector
Tags: Gas Detector, Gastron
Description
Reviews (0)
Be the first to review “Gastron TS-4000Ex Series Intelligent Toxic Gas Detector” Cancel reply
Related Products
Tek Know TC65M (30°C to 650°C) Temperature Calibrator
Highlights:
- Range 50 to 600°C
- 166 mm well depth
- No liquids, safe dry calibration
- Stability to ±0.75°C
- Accurate to ±1.5°C
- 3 buttons – easy to use
Tek Know TC650 (50°C to 650°C) Temperature Calibrator
Highlights:
- Range 50 to 600°C
- Tool for changing inserts
- Temperature calibrator: TC50 or 650
- Insertion tube with 6.5 mm hole.
OMC-139 Marine Wind Display
Highlights:
- Double led circle
- Gust display
- 2 minutes average & 10 minutes average
- Remote brightness control (optional)
- Compatible with several wind sensors
RKI GX-2009 Portable Multi Gas Detector with Charger
Highlights:
- Simultaneous detection of 4 gases, LEL, O2, H2S & CO
- 3 visual alarm LED’s
- Dual audible alarm ports
- 20 hours of operation (NiMH batteries)
Riken Keiki RX-8000 Portable Multi Gas Detector
Highlights:
- Large simultaneous display with auto back lighting
- Compact and lightweight
- Gases are drawn by the built-in pump.
- Strong sample drawing capability
- Lithium-ion rechargeable battery
- The battery unit can be replaced by users.
- Ergonomic design with wrist strap for hands free operation
LR-Cal LPP 700 Pressure Test Pump 700 bar (10 000 psi)
Highlights:
- Hydraulic (operated with oil or water)
- Pressure generation up to +700 bar (10150 psi)
- Portable
- Simple and easy operation
Fluke 700PTP-1 Pneumatic Test Pump
Highlights:
- Easily cleaned without disassembly
- Two pressure ports allowing simultaneous connection
- Adjustable stroke length
- Easy to use
Nagman 650H/650H2 Universal Dry Block Medium Temperature Calibrator
Highlights:
- Range: 20°C above Ambient to 650°C
- Accuracy: ±1.5°C
- Stabilization Time: 15 Minutes
- Stability: ±0.5°C (650-H); ±0.6°C (650-H2)
Recently Viewed
Konsberg AIS 200 Automatic identification system
Highlights:
- Easy installation
- AIS Minimum Keyboard Display
- VHF data communication
- GPS Position Interface
Skipper Echosounder ED165
Highlights:
- Paper Recording Echosounder
- 50 kHz
Furuno FA-150 UAIS Transponder
Highlights:
- Display 4.5 ‘Monochrome
- Bandwidth 25 kHz/ 12.5 kHz
- Position Accuracy
- TX/RX Frequency
VERIPOS 90984 Antenna Positioning System
Highlights:
- Accurate and Reliable
- Low Cost
- High Performance
- Light weight
NAVITWIN IV-Sperry Marine, Heading Management System
Highlights:
- Colour TFT LCD screen
- Heading difference monitor
- Central gyro compass control unit
- Magnetic heading
Smartfind Mcmurdo GMDSS Navtex Receiver
Highlights:
- 6” daylight viewable 4 colour display
- ECDIS and INS integration
- Easy to operate
- Printer output
There are no reviews yet.