- TS – 400 Ex series is an auto sampling-type combustible gas detector, having a built-in high efficient micro pump. It can detect parts per million (PPM), Lower explosive limit (LEL) and volume (%), applying a semiconductor sensor, catalytic sensor and thermal conductivity sensor.
- It was designed to monitor for gas leaks in hazardous areas such as low-temperature, high-ground areas, etc., which place a barrier to maintenance and repair, by continuously sampling gas in those places, using explosion-proof housing.
- Display indicates the density of leaked gas.
- Minimizes the influence from the exterior environment (temperature, humidity, pressure, electrical noise, etc.); at the same time it was manufactured to guarantee long life, high sensitivity, linearity, reproducibility , etc.
Gastron TS-4000Ex Series Intelligent Toxic Gas Detector
In Stock
Services:
-
Free Delivery
Highlights:
Compare- Local LCD display
- 3-wire connection
- 4-20mA signal output
- Long life sensor element
Categories: Calibration Instruments, Gas Detector
Tags: Gas Detector, Gastron
Description
Reviews (0)
Be the first to review “Gastron TS-4000Ex Series Intelligent Toxic Gas Detector” Cancel reply
Related Products
Wilhelmsen UNIRX-1A REFRIGERANT LEAK DETECTOR
Highlights:
- High and Low sensitivity level
- Cordless
- Audible alarm
- 5 ppm sensitivity
- Batteries 2 pcs C-cell alkaline
OMC-139 Marine Wind Display
Highlights:
- Double led circle
- Gust display
- 2 minutes average & 10 minutes average
- Remote brightness control (optional)
- Compatible with several wind sensors
Gastec GV-100/100S Gas sampling pump kit
Highlights:
- Comfortable Grip
- Intrinsically Safe
- Weight: 270Gm
- Handle lockable
ASCO EF-8316G4 Solenoid Valve Red-Hat (8030 Series) | 4-way 1/2 In NPT 120/60-110/50 AC
Highlights:
- Operate at low pressures
- Normally Closed or Normally Open operation.
- Widely used for dispensing
- Normally Open valve well suited for venting systems
Tek Know TC650 (50°C to 650°C) Temperature Calibrator
Highlights:
- Range 50 to 600°C
- Tool for changing inserts
- Temperature calibrator: TC50 or 650
- Insertion tube with 6.5 mm hole.
LR-Cal LPP 700 Pressure Test Pump 700 bar (10 000 psi)
Highlights:
- Hydraulic (operated with oil or water)
- Pressure generation up to +700 bar (10150 psi)
- Portable
- Simple and easy operation
SIKA TP17650M Dry Block Temperature Calibrator (230v)
Highlights:
Temperature Range: Room temperature…650 °C
Power Supply: 230V 50/60Hz 1000w
Date of Manufacture: 01/2017
Made In Germany
Fluke 700PTP-1 Pneumatic Test Pump
Highlights:
- Easily cleaned without disassembly
- Two pressure ports allowing simultaneous connection
- Adjustable stroke length
- Easy to use
Recently Viewed
VERIPOS 90984 Antenna Positioning System
Highlights:
- Accurate and Reliable
- Low Cost
- High Performance
- Light weight
LR-Cal LPP 700 Pressure Test Pump 700 bar (10 000 psi)
Highlights:
- Hydraulic (operated with oil or water)
- Pressure generation up to +700 bar (10150 psi)
- Portable
- Simple and easy operation
MX521B DGPS Smart Antenna with GLONASS
Highlights:
- Connects directly to MX Control and Display Unit
- Better than 3 meter GPS position accuracy
- D/GPS mode compatibility with MX Seris CDU and P3007
- Better than 1 meter DGPS Position accuracy
JRC JMA-9123 7XA/9XA 9900 Series ARPA RADAR
Highlights:
- 23” high visibility LCD screen
- Digital signal processing
- Wide dynamic range receiver
- High speed version available
Solo Heat and Smoke Detector Testing Equipment
Highlights:
- Easy to use
- Low cost
- High Efficiency
- Approved by SOLO
Viscochief VCU-160 Alfa Laval Viscosity Controller
Highlights:
- 110VAC, 220VAC
- 55°C Maximum
- Temperature Sensor, Remote Communication
- Function Alarm, Process Alarm,
Nakakita NS TM 732 0 to 200°C Pneumatic Temperature Controller
Highlights:
- Type: NSTM 732
- Range: 0-200c
- Air Pressure: 1.4 kg/cm2
- Control Pressure: 0.2 – 1.0 kg/cm2
There are no reviews yet.