- SIKA ELECTRONIC TP8000 TEMPERATURE CALIBRATOR Description Temperature calibration Brand Sika Model TP8000 Temp range -0 C to 200 C dry-block calibration SIKA temperature calibrators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories.Quality assurance and test equipment monitoring.
Sika TP18600 600C Temperature Calibrator
In Stock
Compare
Categories: Calibration Instruments, Temperature Calibrator
Tags: Sika, Temperature Calibrator
Additional information
Modal | TP18600 |
---|---|
Brand | Sika |
Reviews (0)
Be the first to review “Sika TP18600 600C Temperature Calibrator” Cancel reply
Related Products
OMC-139 Marine Wind Display
Highlights:
- Double led circle
- Gust display
- 2 minutes average & 10 minutes average
- Remote brightness control (optional)
- Compatible with several wind sensors
Wilhelmsen UNIRX-1A REFRIGERANT LEAK DETECTOR
Highlights:
- High and Low sensitivity level
- Cordless
- Audible alarm
- 5 ppm sensitivity
- Batteries 2 pcs C-cell alkaline
LR-Cal LPP 700 Pressure Test Pump 700 bar (10 000 psi)
Highlights:
- Hydraulic (operated with oil or water)
- Pressure generation up to +700 bar (10150 psi)
- Portable
- Simple and easy operation
Gastron TS-4000Ex Series Intelligent Toxic Gas Detector
Highlights:
- Local LCD display
- 3-wire connection
- 4-20mA signal output
- Long life sensor element
GX-8000 (LEL) Portable Single Gas Monitor
3 ★
3 ★
1 Rating
5 ★
0
4 ★
0
3 ★
1
2 ★
0
1 ★
0
Ametek ATC-140A/B Advanced Temperature Calibrator Range: -20°C to 140°C (-4 to 284°F)
Highlights:
- Dual-zone Heating block
- Insert diameter 63,5 mm (2.5 in)
- Liquid bath configuration Yes
- Accuracy A model 0.20°C (0.36°F)
- Min. temp. -20°C (-4°F)
- Max. temp. 140°C (°284F)
Tek Know TC65M (30°C to 650°C) Temperature Calibrator
Highlights:
- Range 50 to 600°C
- 166 mm well depth
- No liquids, safe dry calibration
- Stability to ±0.75°C
- Accurate to ±1.5°C
- 3 buttons – easy to use
Vimex TC60M (30°C to 600°C) Temperature Calibrator
Highlights:
• Range 50 to 600°C
• Accurate to ± 1,5°C
• 3 buttons – easy to use
• 155 mm well depth
Recently Viewed
Furuno FA-150 UAIS Transponder
Highlights:
- Display 4.5 ‘Monochrome
- Bandwidth 25 kHz/ 12.5 kHz
- Position Accuracy
- TX/RX Frequency
There are no reviews yet.