- SIKA ELECTRONIC TP8000 TEMPERATURE CALIBRATOR Description Temperature calibration Brand Sika Model TP8000 Temp range -0 C to 200 C dry-block calibration SIKA temperature calibrators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories.Quality assurance and test equipment monitoring.
Sika TP18600 600C Temperature Calibrator
In Stock
Compare
Categories: Calibration Instruments, Temperature Calibrator
Tags: Sika, Temperature Calibrator
Additional information
Modal | TP18600 |
---|---|
Brand | Sika |
Reviews (0)
Be the first to review “Sika TP18600 600C Temperature Calibrator” Cancel reply
Related Products
SIKA TP17650M Dry Block Temperature Calibrator (230v)
Highlights:
Temperature Range: Room temperature…650 °C
Power Supply: 230V 50/60Hz 1000w
Date of Manufacture: 01/2017
Made In Germany
Gastron TS-4000Ex Series Intelligent Toxic Gas Detector
Highlights:
- Local LCD display
- 3-wire connection
- 4-20mA signal output
- Long life sensor element
Ametek ATC-140A/B Advanced Temperature Calibrator Range: -20°C to 140°C (-4 to 284°F)
Highlights:
- Dual-zone Heating block
- Insert diameter 63,5 mm (2.5 in)
- Liquid bath configuration Yes
- Accuracy A model 0.20°C (0.36°F)
- Min. temp. -20°C (-4°F)
- Max. temp. 140°C (°284F)
Gastec GV-100/100S Gas sampling pump kit
Highlights:
- Comfortable Grip
- Intrinsically Safe
- Weight: 270Gm
- Handle lockable
Fluke 700PTP-1 Pneumatic Test Pump
Highlights:
- Easily cleaned without disassembly
- Two pressure ports allowing simultaneous connection
- Adjustable stroke length
- Easy to use
Vimex TC60M (30°C to 600°C) Temperature Calibrator
Highlights:
• Range 50 to 600°C
• Accurate to ± 1,5°C
• 3 buttons – easy to use
• 155 mm well depth
OMC-139 Marine Wind Display
Highlights:
- Double led circle
- Gust display
- 2 minutes average & 10 minutes average
- Remote brightness control (optional)
- Compatible with several wind sensors
ASCO EF-8316G4 Solenoid Valve Red-Hat (8030 Series) | 4-way 1/2 In NPT 120/60-110/50 AC
Highlights:
- Operate at low pressures
- Normally Closed or Normally Open operation.
- Widely used for dispensing
- Normally Open valve well suited for venting systems
Tek Know TC650 (50°C to 650°C) Temperature Calibrator
Highlights:
- Range 50 to 600°C
- Tool for changing inserts
- Temperature calibrator: TC50 or 650
- Insertion tube with 6.5 mm hole.
Recently Viewed
MX521B DGPS Smart Antenna with GLONASS
Highlights:
- Connects directly to MX Control and Display Unit
- Better than 3 meter GPS position accuracy
- D/GPS mode compatibility with MX Seris CDU and P3007
- Better than 1 meter DGPS Position accuracy
Nagman 650H/650H2 Universal Dry Block Medium Temperature Calibrator
Highlights:
- Range: 20°C above Ambient to 650°C
- Accuracy: ±1.5°C
- Stabilization Time: 15 Minutes
- Stability: ±0.5°C (650-H); ±0.6°C (650-H2)
Anthea Electromagnetic Speed Log single or dual axis-BEN Marine
Highlights:
â–º One IP65 metal case
â–º One sensor
â–º One hull fitting
Nakakita NS TM 732 0 to 200°C Pneumatic Temperature Controller
Highlights:
- Type: NSTM 732
- Range: 0-200c
- Air Pressure: 1.4 kg/cm2
- Control Pressure: 0.2 – 1.0 kg/cm2
Anschutz Nautopilot NP 2010
Highlights:
- Accurate steering
- Speed adaptive
- Remote operator units
- Quick and simple
NAVITWIN IV-Sperry Marine, Heading Management System
Highlights:
- Colour TFT LCD screen
- Heading difference monitor
- Central gyro compass control unit
- Magnetic heading
Furuno FA-150 UAIS Transponder
Highlights:
- Display 4.5 ‘Monochrome
- Bandwidth 25 kHz/ 12.5 kHz
- Position Accuracy
- TX/RX Frequency
OMC-139 Marine Wind Display
Highlights:
- Double led circle
- Gust display
- 2 minutes average & 10 minutes average
- Remote brightness control (optional)
- Compatible with several wind sensors
Wilhelmsen UNIRX-1A REFRIGERANT LEAK DETECTOR
Highlights:
- High and Low sensitivity level
- Cordless
- Audible alarm
- 5 ppm sensitivity
- Batteries 2 pcs C-cell alkaline
There are no reviews yet.