The TC40 & TC650 temperature calibrators areportable instruments
that require no physical installation other than connection to a grounded
ACpower source. Do not connect AC power until you have verified
that the line voltage is correct and that the proper fuse is installed.
Otherwise damage to the equipment may occure.
Tek Know TC650 (50°C to 650°C) Temperature Calibrator
In Stock
Services:
-
Free Delivery
Highlights:
Compare- Range 50 to 600°C
- Tool for changing inserts
- Temperature calibrator: TC50 or 650
- Insertion tube with 6.5 mm hole.
Categories: Calibration Instruments, Temperature Calibrator
Tags: Calibrator, Tek Know
Description
Reviews (0)
Be the first to review “Tek Know TC650 (50°C to 650°C) Temperature Calibrator” Cancel reply
Related Products
SIKA TP17650M Dry Block Temperature Calibrator (230v)
Highlights:
Temperature Range: Room temperature…650 °C
Power Supply: 230V 50/60Hz 1000w
Date of Manufacture: 01/2017
Made In Germany
Gastron TS-4000Ex Series Intelligent Toxic Gas Detector
Highlights:
- Local LCD display
- 3-wire connection
- 4-20mA signal output
- Long life sensor element
ASCO EF-8316G4 Solenoid Valve Red-Hat (8030 Series) | 4-way 1/2 In NPT 120/60-110/50 AC
Highlights:
- Operate at low pressures
- Normally Closed or Normally Open operation.
- Widely used for dispensing
- Normally Open valve well suited for venting systems
Tek Know TC65M (30°C to 650°C) Temperature Calibrator
Highlights:
- Range 50 to 600°C
- 166 mm well depth
- No liquids, safe dry calibration
- Stability to ±0.75°C
- Accurate to ±1.5°C
- 3 buttons – easy to use
Ametek ATC-140A/B Advanced Temperature Calibrator Range: -20°C to 140°C (-4 to 284°F)
Highlights:
- Dual-zone Heating block
- Insert diameter 63,5 mm (2.5 in)
- Liquid bath configuration Yes
- Accuracy A model 0.20°C (0.36°F)
- Min. temp. -20°C (-4°F)
- Max. temp. 140°C (°284F)
OMC-139 Marine Wind Display
Highlights:
- Double led circle
- Gust display
- 2 minutes average & 10 minutes average
- Remote brightness control (optional)
- Compatible with several wind sensors
Recently Viewed
ICON RESEARCH DK-2 DOCTORDIESEL ENGINE ANALYSIS TESTER
Highlights:
- Reduced maintenance costs
- Improved performance
- Reduced fuel consumption
- Reduced emissions through combustion optimization
Furuno FA-150 UAIS Transponder
Highlights:
- Display 4.5 ‘Monochrome
- Bandwidth 25 kHz/ 12.5 kHz
- Position Accuracy
- TX/RX Frequency
Tokimec PR-2000 Autopilot
Highlights:
- Designed for operational simplicity
- More affordable
- Variety of system configurations
- Compatible with a variety of steering systems
NAVITWIN IV-Sperry Marine, Heading Management System
Highlights:
- Colour TFT LCD screen
- Heading difference monitor
- Central gyro compass control unit
- Magnetic heading
Furuno VDR VR-5000
Highlights:
- 12-hour recording of data
- UTC time tagged for system
- Reliable and fast data exchange
- Easy setup by using PC with Web Browser
Viscochief VCU-160 Alfa Laval Viscosity Controller
Highlights:
- 110VAC, 220VAC
- 55°C Maximum
- Temperature Sensor, Remote Communication
- Function Alarm, Process Alarm,
OMC-139 Marine Wind Display
Highlights:
- Double led circle
- Gust display
- 2 minutes average & 10 minutes average
- Remote brightness control (optional)
- Compatible with several wind sensors
Jotron TR-8000 Class A AIS with GPS Antenna
Highlights:
- 7″ touch screen display
- Software upgradable
- Easy ECDIS interfac
- Collision alarms (tCPA, CPA)
- Separate display and transponder unit
Konsberg AIS 200 Automatic identification system
Highlights:
- Easy installation
- AIS Minimum Keyboard Display
- VHF data communication
- GPS Position Interface
GX-8000 (LEL) Portable Single Gas Monitor
3 ★
3 ★
1 Rating
5 ★
0
4 ★
0
3 ★
1
2 ★
0
1 ★
0
There are no reviews yet.