- The ANTHEA EM speed log is designed for merchant and cruising ships. It is used with maximum 70 m length of cable, between the main cabinet and the sensor.
- lectromagnetic Speed Log in either a simple or dual axis configuration. The Anthea Electromagnetic Speed Log is composed of one IP65 metal case, one 48mm sensor that can be dismantled when ship is afloat, and one weldable or screw-on-type hullfitting with valve.
- The Anthea has a 2 line LCD display in an IP65 rated metal case, which displays Speed on a circular bargraph. Also shown is the covered distance including reset and Scale, Test, Alarm LED display. There is also an Electromechanical mile adding counter, no rest, 2 Alarm sets and Error message display.
- The Anthea Electromagnetic speed log has automatic gain control and damping control via strap. The unit also has 3 points linearization, brightness control and permanent self-test.
- ANTHEA is compatible with all navigation peripherals.
Anthea Electromagnetic Speed Log single or dual axis-BEN Marine
In Stock
Highlights:
Compare► One IP65 metal case
► One sensor
► One hull fitting
Categories: Bridge Navigation, Speed Log
Tags: Ben Marine, Speed Log
Reviews (0)
Be the first to review “Anthea Electromagnetic Speed Log single or dual axis-BEN Marine” Cancel reply
Related Products
Furuno Doppler Speed Log DS-80
Highlights:
- Doppler effect principle
- Latest IMO, IEC and ISO
- Hight accuracy
- 1 MHz sonic frequency
Raytheon Anschutz Pilotstar D Autopilot
Highlights:
- Accurate steering
- Speed adaptive
- Remote operator units
- Quick and simple
Furuno FA-150 UAIS Transponder
Highlights:
- Display 4.5 ‘Monochrome
- Bandwidth 25 kHz/ 12.5 kHz
- Position Accuracy
- TX/RX Frequency
Furuno NX 700A-B Navtex Receiver
Highlights:
- Low power consumption
- 5″ silver bright LCD
- NAV data display
- Dual channel reception
Recently Viewed
Samyung SIS-5 Class A AIS Trasponder
Highlights:
- GLONASS/GPS function
- User-friendly one touch keypad
- Fully compatible with all NMEA standards
- System self-restoring function
MX521B DGPS Smart Antenna with GLONASS
Highlights:
- Connects directly to MX Control and Display Unit
- Better than 3 meter GPS position accuracy
- D/GPS mode compatibility with MX Seris CDU and P3007
- Better than 1 meter DGPS Position accuracy
Nakakita NS TM 732 0 to 200°C Pneumatic Temperature Controller
Highlights:
- Type: NSTM 732
- Range: 0-200c
- Air Pressure: 1.4 kg/cm2
- Control Pressure: 0.2 – 1.0 kg/cm2
JRC JAN-2000 ECDIS Complete Set
Highlights:
- 19 and 23-inch high brightness display
- New high performance processor
- AVCS pre-installed & C-Map e-Token standard
- Multiple and wide screen viewing
- Built in UPS for safety shutdown
Furuno FA-150 UAIS Transponder
Highlights:
- Display 4.5 ‘Monochrome
- Bandwidth 25 kHz/ 12.5 kHz
- Position Accuracy
- TX/RX Frequency
NAVITWIN IV-Sperry Marine, Heading Management System
Highlights:
- Colour TFT LCD screen
- Heading difference monitor
- Central gyro compass control unit
- Magnetic heading
ASCO EF-8316G4 Solenoid Valve Red-Hat (8030 Series) | 4-way 1/2 In NPT 120/60-110/50 AC
Highlights:
- Operate at low pressures
- Normally Closed or Normally Open operation.
- Widely used for dispensing
- Normally Open valve well suited for venting systems
Furuno NX 700A-B Navtex Receiver
Highlights:
- Low power consumption
- 5″ silver bright LCD
- NAV data display
- Dual channel reception
Jotron TR-8000 Class A AIS with GPS Antenna
Highlights:
- 7″ touch screen display
- Software upgradable
- Easy ECDIS interfac
- Collision alarms (tCPA, CPA)
- Separate display and transponder unit
Konsberg AIS 200 Automatic identification system
Highlights:
- Easy installation
- AIS Minimum Keyboard Display
- VHF data communication
- GPS Position Interface
There are no reviews yet.